Concrete & flatwork
Driveways · patios · walkways · pool decks
Controlled high pressure with a rotary surface cleaner for an even, line-free finish. Oil, rust and battery-acid stains get targeted pre-treatment — not just a quick pass.
Concrete wants pressure. Stucco wants chemistry. We read the surface first, match the method, and finish with a clean that lasts — driveways, siding, decks, gutters and full commercial exteriors.
Blasting every surface at full pressure is how you etch concrete, carve lines into wood, and drive water behind siding. So we don’t. Hard flatwork gets controlled high pressure and a rotary surface cleaner for an even, stripe-free finish. Anything porous or painted gets a soft wash — low pressure plus the right cleaning solution doing the work, so the force never does the damage.
Driveways · patios · walkways · pool decks
Controlled high pressure with a rotary surface cleaner for an even, line-free finish. Oil, rust and battery-acid stains get targeted pre-treatment — not just a quick pass.
Siding · stucco · eaves · exterior walls
A low-pressure soft wash lifts algae, mildew and oxidation without forcing water behind the cladding. A measured sodium-hypochlorite solution with surfactants does the cleaning; the pressure never does the damage.
Wood · composite · vinyl · gutter faces
Gentle pressure tuned to the material, with wood brightener where it’s needed. Gutter exteriors de-streaked so the whole roofline reads clean.
Storefronts · sidewalks · dumpster pads
Scheduled around your hours, including night work. Gum, grease and grime off high-traffic concrete; building faces soft-washed to protect signage and finishes.
Anyone can point a wand. A clean that lasts — on a surface that’s still intact afterward — comes from chemistry, dwell time and the right call on pressure.
We identify each surface and test a discreet spot to confirm the right pressure and dilution before we start.
Surfaces get a measured cleaning solution — sodium hypochlorite cut to the correct strength, boosted with surfactants so it clings and dwells instead of running off.
We let the chemistry break down algae, mildew and grime. Controlled dwell time is what makes a soft wash work — and what protects the surface.
Flatwork gets high pressure and a surface cleaner; siding and wood get a low-pressure rinse. The method matches the material, every time.
A thorough neutral rinse, with landscaping pre-wet and protected throughout. We leave the surface clean and the plants unbothered.
Commercial exteriors cleaned after close, so your lot, sidewalks and storefront are spotless before the doors open. Owner-operated, fully insured, and backed by 78 five-star reviews across the Sacramento area.
Book a walk-throughTell us the surfaces and we’ll recommend the right approach — no pressure, no guesswork.