Rooftop arrays
Residential · tile · comp · low-slope
Water-fed poles reach the roof from the ground wherever we can, so every panel gets cleaned thoroughly — without trekking across your roof or the glass.
Dust, pollen and bird droppings can quietly cut a panel’s production by 15–25%. We bring it back with pure-water cleaning and a careful, panel-safe method — so your array earns everything it was built to.
In full sun, a panel’s tempered glass can climb past 150°F. Hit that hot surface with cold water and the sudden change can thermal-shock the glass and crack it — and a single microcrack can quietly drop a panel’s output and void its warranty. Most “quick rinse” cleaners never think about it. We do. We clean in the cool of early morning or evening, let the array come down in temperature, and use temperature-matched, purified water — so your panels are cleaned the way the manufacturer intended: spotless, and unharmed.
Residential · tile · comp · low-slope
Water-fed poles reach the roof from the ground wherever we can, so every panel gets cleaned thoroughly — without trekking across your roof or the glass.
Ground-mount · carports · large sites
From a backyard ground-mount to a full commercial field, we scale the method and schedule the work around your production and operations.
Deionized · spot-free · residue-free
Purified water lifts dirt and dries without spots or mineral film — no soaps left behind to attract the next layer of grime.
Pollen · dust · droppings · hard water
Baked-on pollen, bird droppings and sprinkler hard-water spots gently lifted — the buildup that shades cells and steals output, gone.
Panels are an investment, not a patio. Every step protects the glass, the cells and the warranty while getting them genuinely clean.
We check array temperature and weather and schedule for the cool hours — never blasting hot panels in peak sun.
If the glass is hot, we let it come down before any water touches it, so there’s no risk of thermal shock.
Deionized water does the cleaning and dries spot-free — no soaps or solvents that leave residue or harm the coating.
Soft brushes and water-fed poles sized to the panel. No abrasives, and no high pressure on the cells or seals.
Water close to the panel’s own temperature, edges and frames respected — and your array left producing like new.
For commercial fields and ground arrays, we clean in the early morning before peak production — minimal downtime, maximum return. Owner-operated, fully insured, and backed by 78 five-star reviews across the Sacramento area.
Book a walk-throughTell us your array — rooftop or ground, and how many panels — and we’ll get you a clean that pays for itself.